When using more than one handset with the same base unit, calls can be made
internally between the handsets referred to as internal calls, or intercom. Intercom
calls can only be made between handsets connected to the same base unit
until HS- is shown in the handset display.
Enter the handset number for the handset that you wish to call,
Should an external call be received while an intercom call is in progress, a tone will
be heard. Terminate the intercom call by pressing
Transferring calls between handsets
An external call can be transferred from one handset to another (providing both
handsets are operating on the same base unit).
While an external call is connected.
until HS- is shown in the handset display.
Enter the handset number for the handset that you wish to call,
To transfer the external call press
q
on the calling handset.
q
If you decide not to transfer the call press and hold
calling handsets display, alternatively wait until the person you have intercomed
A conference call allows two handsets and an external caller to be on line at the
While an external call is connected.
until HS- is shown in the handset display.
Enter the handset number for the handset that you wish to call,
q
on the called handset.
q
To connect all three parties in a conference call,
stops ashing in the handset display.
on either handset to terminate the conference call, the other handset can
q
on either handset to terminate the conference call, the other handset can
q
then continue the conversation with the external party.