AUDIOLINE 704 - Operation; Making a Call with Audioline 704; Receiving a Call on Audioline 704; Audioline 704 Redial Function

English
8
www.doro.com
8 www.doro.com8
Operation
Important!
Please note when programming all references to press = to press once and then immediately release
the button.
Making a call
1.
Enter the required telephone number. Mistakes can be erased using
C
.
2.
Press
q
the telephone number will now be dialled.
3.
Press
q
again to terminate the call.
q
again to terminate the call.
q
Receiving a call
1.
Wait for the handset to ring.
2.
Press
q
to answer the call.
q
to answer the call.
q
3.
Press
q
to terminate the call.
q
to terminate the call.
q
Please note!
If the telephone cannot connect to a line, a warning tone will be heard. The problem may be due to
the batteries running low, the handset being too far from the base unit or all of the transmission
channels being engaged.
Redial function
The 10 most recently dialled numbers can easily be redialled using
r
.
1.
Repeatedly press
r
to scroll to the desired telephone number.
2.
Press
q
the displayed number will now be dialled.
q
the displayed number will now be dialled.
q
Key lock
This function locks the push buttons on the handset to prevent unintentional usage.
1.
Press and hold
N
until the display shows
N
.
2.
To deactivate the key lock press and hold
N
again.
Calls can still be received even if the key lock is active. When the call is  nished the
handset returns to locked mode.