AUDIOLINE TEL136 - 4 Settings; Setting Date and Time; Setting the Area Code

33
GB
4 Settings
Setting date and time
1 The receiver is placed on the base.
2 Press the Set key.
The display shows  1 .
3 Press the Set key, the year flashes.
4 Use the Up key ▲ or the Down key ▼ to set the year.
5 Press the Set key to confirm.
6 Use the same method to set the month, date, hour and minute. After
each setting press the Set key to confirm.
In idle display, the current weekday flashes.
Setting the area code
If the local area code is set, the phone will auto-filter and suppress the
area code in the display if the first several digits are same as the local
area code.
If your local area code consist of less than 6 digits, leave the  after the
last digit.
Please note, that for using this feature the transmission of the caller
number must be available with your telephone line. Contact your net-
work provider for further information.
1 The receiver is placed on the base.
2 Press the Set key.
3 Press the Up key ▲.
The display shows  2 0.
4 Press the Set key, the first digit will flash.
Settings