AUDIOLINE TEL136 - Babycall

46
Special functions
4 Set the ringing volume to 0db (see page 37).
Babycall
If this function is set to on, pressing any key {except Redial key} or
picking up the receiver will dial out the baby call number automatically.
Activate baby call and enter destination telephone number
1 The telephone is in idle state.
2 Press and hold down the Redial key for approx. 3 seconds.
The display shows  and  (flashing).
3 Press the Up key ▲ or the Down key ▼ to activate the function.
 is flashing.
4 Press the Set key.
The display shows   (or the preset baby call number. Press the
Delete key to delete).
5 Enter the desired destination telephone number and press the Set key to
confirm.
Deactivating baby call
1 The telephone is in idle state.
2 Press and hold down the Redial key for approx. 3 seconds.
The display shows  and  is flashing.
3 Press the Up key ▲ or the Down key ▼ to deactivate the function.
 is flashing.
4 Press the Set key.