Need help?Do you have a question about the Audiovox Rampage AMP-604 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| RMS Power at 4 Ohms | 60 Watts x 4 Channels |
| RMS Power at 2 Ohms | 90 Watts x 4 Channels |
| Bridged RMS Power at 4 Ohms | 180 Watts x 2 Channels |
| THD at RMS Output | 0.05% |
Details key technical specifications for the Rampage AMP-604 amplifier, including power, impedance, and frequency response.
Essential safety advice for installation and operation, covering wiring, ventilation, and fuse replacement.
Instructions on selecting a mounting location and preparing it by drilling holes for the amplifier.
Guidance on connecting the amplifier's power, ground, and remote turn-on terminals.
Guidance on connecting speakers and choosing between low-level and high-level audio inputs.
Visual representation of how to connect audio sources to the amplifier using RCA or high-level inputs.
Visual guide illustrating how to connect speakers to the amplifier's output terminals.
Explanation of the power LED, how to adjust gain controls, and information regarding the amplifier's fuse.
Outlines the terms and conditions of the 90-day and 12-month limited warranty for the amplifier.
To Next Page
