Need help?Do you have a question about the Audiovox Rampage AXT-240 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| RMS Power at 4 Ohms | 40W x 2 |
| RMS Power at 2 Ohms | 60W x 2 |
| Bridged RMS Power at 4 Ohms | 120W x 1 |
| Signal to Noise Ratio | >90dB |
| THD at RMS Output | <0.05% |
| Frequency Response | 20 Hz - 20 kHz |
| Power Output | 240W |
| Signal-to-Noise Ratio | 90 dB |
| Input Sensitivity | 0.2V - 4V |
Covers correct wiring, battery connection, fuse replacement, and voltage requirements.
Ensures proper air circulation to prevent overheating and thermal shutdown.
Selecting a suitable mounting spot and preparing it for installation.
Steps for physically attaching the amplifier to the mounting surface.
Details on connecting the amplifier to the vehicle's battery and ground.
Connecting the remote turn-on lead to switch the amplifier on/off.
Instructions for connecting speakers to the amplifier's output terminals.
Guidance on connecting audio sources via low-level or high-level inputs.
Explains the function of the power indicator lights.
How to adjust input sensitivity for optimal performance.
Information on the amplifier's internal fuses and their purpose.
To Next Page
