Input Sensitivity: Low-level 200 mV - 2 V.
High-level 2V - 10 V
Supply Voltage: 12 volts, negative ground
Fuse Rating: 10 amps.
Dimensions (W X H X D): 8-5/8" X 2-1/8" X 5-1/2"
219 mm X 54.3 mm X 140 mm
Maximum Output Power: 240 Watts
30 Watts RMS @ 4 Ohms
Output Impedance: 4-8 Ohms
Frequency Response: 20Hz - 25KHz. +/-1 dB
Channel Separation: 60 dB
Signal / Noise Ratio: 80 dB
Input Impedance: Low-level 10K Ohms
high-level 100 Ohms
* Due to continuing improvement, Audiovox reserves the right to change features and design without notice.
-1-
This power amplifier has been designed to provide high Quality performance with a
minimum of maintenance. However, it's performance will only be as good as the care
and quality of components with which it is installed. We therefore advise that you
read these instructions very carefully to familiarize yourself with the product and it's
features.
Should you require assistance with the installation or wiring so this unit, please call
our toll-free "HELP" line at 1-800-645-4994 during the days/hours shown.
HELP!
1-800-645-4994
Monday-Friday 8:30am - 7:00pm Eastern
Saturday 9:00am - 5:00pm Eastern
SPECIFICATIONS
HIGH PERFORMANCE STEREO AMPLIFIER
To Next Page
Loading...
Need help?
General
