128-7193A
5 of 32
NOTE: The SIRIUS® signal can be received and
processed virtually anywhere as long as there
are no obvious satellite signal obstructions
such as nearby buildings, high terrain,
parking garages or tunnels.
The Shuttle is typically installed in an
accessible location of the vehicle (dash area),
consistent with line-of-sight operation of the
remote control, and/or within easy reach of the
driver. For home use, situate the Shuttle
close to your stereo receiving equipment.
Enjoying Your SIRIUS®
Shuttle
You can begin to enjoy Sirius® Satellite Radio as soon
as the Shuttle and Kit installation are complete:
1.Set up your Audiovox Shuttle using the installation
instructions included in your Home Kit, Vehicle
Kit or Boom Box Kit, or with the help of a profes
sional installer.
NOTE: Refer to Antenna Aiming (page 21) during
the installation procedure.
2. When power is available to the unit, note that the
integral Power button LED icon lights red. Then
press the Power button to turn on the Shuttle.
3. The Sirius logo (
) appears on the display
followed by the Sirius preview channel. If this is the
first time using the Shuttle, the screen will display
“Updating Channels”. If not, go to channel 184 us-
ing the direct channel method, page 9, Direct Tun-
ing.
4.To obtain the Sirius identification (ID) number,
press the MENU button. The Menu Options page
appears with the Sirius ID option highlighted. Press
the Encoder knob and the 12 digit Sirius ID number
will appear. Write the number here for future refer-
ence.
5. Activate your Sirius® radio service ---- it’s easy. You
have one of two choices to activate your service:
(a) Visit the website at sirius.com and click on
the “JOIN” section. You will then need to follow
some simple directions and provide Sirius with
some basic information in order to activate your
service.
-5-
To Next Page
Loading...
Need help?
General
