Audiovox Xpress XM User Manual

-16-
NOTE: To prevent distortion caused by overdriving the audio
playback device input, it is recommended that you adjust the
audio level signal to mid-range.
Figure 10. Audio Level Screen
Antenna Aiming (Home Installation)
This feature allows the user to aim the antenna to optimize XM7
signal reception (see Figure 11). Upon entering the antenna aim-
ing mode, a horizontal bar graph is displayed with a minus (-)
sign on the left and a plus (+) on the right. The horizontal bar
graphs represent the repeater signal and satellite transmission
signal strength. Position the antenna to optimize either the satel-
lite or terrestrial signal. When the optimal setting is achieved,
press the Menu button on the unit or the Menu on the Remote
Control to exit this screen and to return to the main menu.
NOTE: When the Antenna Aiming screen is selected, this
screen does not time-out like the other menu screens.
This screen will stay active until the Menu Button is
pressed again.
Weak Strong
Satellite Signal
Level
T
errestrial Signal
Level
Figure 11. Antenna Aiming Screen
Screen displayed when a
FM Transmitter is set to
“ON”.
Screen displayed when the
FM Frequency is set to OFF

Audiovox Xpress XM Specifications

General

Brand	Audiovox
Model	Xpress XM
Category	Receiver
Language	English