128-7472
14 of 16
-14-
g. At the lowest point of the rear window, route
the cable into the trunk, taking advantage of
existing cable conduits. Then snake the cable
around the passenger compartment to the
back of the XMC10 cradle.
h. In SUV’s, minivans, etc., route the cable into
the vehicle under the rubber molding of the
hatch door or tailgate, and then under the
interior trim.
NOTE: Avoid exposing the cable in the driver
and passenger areas where it could
become entangled in feet or other
objects.
i. Plug the antenna cable into the ANT
connector on the back of the cradle; then plug
the cigarette lighter adapter into the lighter
receptacle.
j. You are now ready to enjoy XM programming
within your vehicle.
To Next Page
Loading...
Need help?
General
