Need help?Do you have a question about the AUMA SQR 07.2-F10 and is the answer not in the manual?
General| Flange | F10 |
|---|---|
| Torque range | 10 Nm to 100 Nm |
| Ambient temperature | -25°C to +70°C |
| Protection class | IP67 |
| Communication | Modbus RTU |
| Mounting | Direct mounting |
General safety principles, standards, and directives for device operation.
Specifies the intended use and limitations of the actuators.
Requirements for using actuators in dust hazardous locations (Zone 22).
Explains hazard symbols, safety alerts, and their meanings.
General safety and connection guidelines for electrical wiring.
Procedures for connecting cables using the AUMA plug/socket system.
Steps for opening and closing the terminal compartment for wiring.
How to engage and disengage manual operation of the actuator.
Procedures for operating the actuator via its motor.
Operating the actuator via local push buttons or remote signals.
Using push buttons for navigating menus and settings.
Explains user levels, password entry, and changing passwords.
Setting the CLOSED and OPEN end positions for the actuator.
Common faults encountered during initial setup and their remedies.
Interpreting display indications for faults, warnings, and errors.
Information on fuses and motor protection systems for troubleshooting.
To Next Page
