Need help?Do you have a question about the AUMA SQR 10.2-F12 and is the answer not in the manual?
General| Type | SQR 10.2-F12 |
|---|---|
| Category | Controller |
| Voltage | 24 V DC |
| Communication | Profibus, Modbus |
| Mounting | On actuator |
General safety principles, standards compliance, and user responsibilities.
Explains hazard symbols like DANGER, WARNING, CAUTION, and NOTICE.
Describes the information found on the actuator's name plate.
Describes the process of mounting the actuator to the valve using a coupling.
Provides fundamental electrical connection guidelines and warnings.
Describes how to engage and disengage manual operation.
Covers local and remote actuator operation modes.
Details user levels and password management.
Details valve position, torque, operation commands, setpoint, pivot points, and multiport valve indications.
Explains the function and setting of end stops.
Step-by-step procedure for setting the CLOSED end stop.
How to set torque switching for overload protection.
Procedure for setting limit switching for end positions.
Lists common faults during commissioning and their remedies.
Explains display indications for faults and warnings.
Explains motor protection mechanisms and indications.
Lists required measures for safe operation and maintenance.
Lists actuator features and operational specifications.
Details features and specifications of control units.
Exploded view and parts list for actuators.
Exploded view and parts list for actuator controls.
To Next Page
