auna 388-BT - BT: Connection and Playback

41
EN
BT: CONNECTION AND PLAYBACK
• Select the Main Function selector (6) to “PHONO/BT” mode. Then press
the BT/Phono button (17) to “BT” position.
• The BT LED indicator (5) will ashing, it means the BT in non
connection/searching mode.
• Switch on the BT feature of your BT device (such as mobile phone) and
select “AUNA 388-BT” BT equipment to connecting.
• Once the connecting was nish and connect successfully, the BT LED (5)
will change to light up.
• Start to playback your BT device and enjoy the music by the main unit.
Remark: Due to ErP stage two requirement and protect the
environment. The unit will switch to stand- by mode automatically once
no any music playing over 15 minutes.