auna 388-BT - Deleting Files (USB;SD, via Remote Control); Delete Single File; Delete All Files

40
EN
Track separation (by remote handset)
You can divide the recording music from phono or tape to USB/SD track by
trace during encoding. Every time when press the (track separation) button
once at remote handset during encoding from phono or tape to USB/SD,
the system will generate a new track and continuous the recording. The text
“ PHONO “ or “ TAPE “ at LCD display will ashing one time, it mean the unit
is creating a new track successfully.
DELETING FILES (USB/SD, VIA REMOTE
CONTROL)
Delete single le (USB/SD, via Remote Control)
• Select at “USB“ or “SD“ mode.
• Press and hold the “Info“ button for 3 seconds and the LCD display (2)
will show (del ---001)
• Press Skip forward or Skip backward button to select the le going to
delete
• Press the “REC“ button to enter “yes / no“ mode and then press skip
forward or skip backward to select “yes“ or “no“.
• Press the “REC“ button again to conrm the setting.
Delete all les
• Select at “USB“ or “SD“ mode.
• Press and hold the “Info“ button for 3 seconds and the LCD display (2)
will show (del ---001)
• Press and hold the “Info“ button again and the LCD will show “format /
y/n“ and ashing. Then press Skip forward or Skip backward to select “y
(yes)“ or “n (no)“.
• Press the “REC“ button again to conrm the setting.
Remarks: All les inside the USB storage media or SD card will be
deleted completely after conrming to “y (yes)“ mode. Press “Stop“
button once at remote handset to quite delete mode
REMOVING USB DRIVE / MEMORY CARD
To remove the USB / memory card, turn o the power or switch the function
mode to either cd, tape or tuner rst. For USB port – un-plug it by pulling
out the USB socket directly, for memory card – just pull out the SD card
directly without bending.