34
EN
/ Pairing” mode in seconds, a series of tones will sound and the “BT”
icon will turn to blinking again from solid.
• Now, you can process for new mobile device pair or power O the BT
Speaker if you wanted.
Erase preset pairing
• Every time you turn On the device and switch to BT mode. It will rstly
searching for the mobile device which has been paired previously and
still in record;
• The device will reconnect this mobile device as priority if it in BT
searching device mode and in connection range.
• If no device found in some seconds, the device will automatically turn
into pairing mode.
• Now you can process for new mobile device pair.
Switch to new pairing from connected mode
• In BT pairing mode, you can switch the Device into BT searching mode
for paring with the new device at any time you desired;
• Long press the “
/ (12)” button to disconnect directly, a series of
tones will sound as identtify and the “BT” icon turn to blinking from
solid.
• Now you can process for new mobile device pair.
BT Music Playing Controls
On your Mobile Device
• Switch to music player menu and choose a music to start the play from
playlist or by using “ / ” button/icon. Play/Pause the playing music
by using “ /
” button or icon.
• Adjust the volume level by using the device’s volume control “Down /
Up” button/icon on your BT device. (Refer to your mobile device user’s
manual when necessary)
On BT Speaker
• In playing music;
• Press the “ / (12)” button to pause the playing music. To resume the
music press it again.
• Rotates the “Adjustment (16)” button to “- ” for decreases volume.
• Rotates the “Adjustment (16)” button to “ +” for increases volume.
• The volume controls range can be used from “U00” minimum to “U30”
maximum.
• Press the “TUN / (10)” button to play previous music.
• Press the “TUN / (11)” button to play next music.
Hand Free Function
• When there is an incoming call during BT music playing mode.
• The ringing sound will up and the playing music will pause
To Next Page
Loading...
