auna KR-140 - Set Cooking Timer; Kitchen Light On;Off

30
EN
To enable the disabled Alarm 1 and or Alarm 2:
For Alarm 1:
• Short press the “ALARM (13)” button to call alarm function, the
symbol will blinking and the previous time set will display at the same
time;
• Then long press the “ALARM (13)” button to enable the Alarm 1 function
which has disabled.
For Alarm 2:
• For Alarm 2:
• Short press the “ALARM (13)” button to call alarm function, the symbol
will blinking.
• Then short press the “ALARM (13)” button again to switch to Alarm 2,
the symbol will blinking and the previous time set will display at the
same time.
• Then long press the “ALARM (13)” button to enable the Alarm 2 function
which has disabled.
SET COOKING TIMER
• Short press the “Timer (14)” button to entry the countdown timer mode,
the LED display switch from current mode to timer display mode, the
timer symbol will blinking and show “05” minutes on LED display; (5
minutes is system default running time when timer is chosen)
• Then rotates the “Adjustment (16)” button to - ” or “ +” for setting your
desired time for cooking timer; (01 ~ 300 minutes can be set)
• Short press the “Timer (14)” or “Adjustment (16)” button to conrm and
the display will switch back to previous current mode screen. The Timer
symbol () is appearing for indication, the Cooking Timer is activated.
• The last 30 seconds of setting time will be countdown on display with
beep every second until time’s up.
• The remaining time of the timer will be circulating display by “time ->
radio frequency -> timer time” repeatedly on LED screen.
• To disable the Timer function:
• Then long press the “Timer (14)” button to disable function and the 
symbol will disappear on LED screen.
KITCHEN LIGHT ON/OFF
• Short press the “Light (7)” button to turn on the kitchen light bar when
necessary.
• Short press the “Light (7)” button again to turn o the kitchen light bar.
Information for Kitchen light function:
- For food demonstration.