29
EN
Wake-up source
= Buzzer (Beeps)
= Tuner (Current selected FM Radio station)
• Short press the “Adjustment (16)” button to conrm once “bU” or “tU” is
selected.
• The Alarm 1 settings are completed and icon is showing on LED
display.
• Use the same methods for set the Alarm 2 function if you want.
Wake-Up Function:
Wake to Buzz
• At the selected Alarm time, the wake-up beeps will turn on for 5
minutes. To stop the Alarm, short press the “Alarm (13)” button.
Wake to Radio
• At the selected Alarm time, the FM radio will automatically turn on
itself. To stop the FM radio, short press the “ (4)” button to turn o the
device.
Dual Alarm time set:
• Repeat the above mentioned set Alarm 1 methods to set Alarm 2 for
dual alarm function if you want.
Use Snooze:
• At the time of wake-up beeps in sound, you can short press the
“Adjustment (16)” button for approximately 9 minutes extra for sleep if
you want. The “Zz” icon will appear as identify.
• And this snooze function can repeat 3 times if you use it.
Remark: When turn on the device by
button will disable the snooze
function if snooze is in using.
To disable the Alarm 1 and or Alarm 2 function:
• Short press the “ALARM (13)” button to call alarm function, the Alarm 1
symbol will blink;
• Short press “ALARM (13)” button again to choose which alarm to
disable.
• In
or blinking status, long press the “ALARM (13)” button to
disable the chosen alarm.
• Disabling the alarm function works only if Alarm 1 and/or Alarm 2 have
been set and in used.
To Next Page
Loading...
