Aura DSP-2x6 - DSP Settings (Presets)

13
DSP Settings (Presets)
You can save 6 independent settings (presets) and quickly switch between them.
IMPORTANT! The settings are retained when the battery power is turned off.
1. Adjust the EQ, delay and crossover settings.
2. To save the current settings to the Preset 1 memory location, hold down
the Preset 1 button for 2 seconds.
3. Change the EQ, delay and crossover settings.
4. To save the current settings to the Preset 2 memory location, hold down
the Preset 2 button for 2 seconds.
5. Briefly press the Preset 1 button to recall the settings stored in Preset 1.
6. Briefly press the Preset 2 button to recall the settings stored in Preset 2.
The preset menu is accessed from the tab of each source.