15
Range selection
Press the (18) BAND button to select the broadcast band
radio stations: FM1, FM2, Fm3.
Automatic search for radio stations
Press button (7) or (5) to quickly search for stations.
Storing and recalling radio stations
Press and hold one of the number buttons (1-6) to store the current radio station.
Press one of the number buttons (1-6) to recall the current radio station.
It is possible to store 6 radio stations in each broadcast band.
Radio
System
Factory reset
Reset to factory settings.
Animation - animation on the main screen
Enabling and setting the delay interval before playing animation on the
device display: no / 15 / 30 sec. / 1 / 2 / 4 min.
Demo mode
Enabling/disabling demo mode.
Car ACC - ignition switch type
Yes - install for a car with ACC position, red wire
The device's power supply is connected to the ACC position of the ignition switch.
No - install for a car without ACC position, the red power wire is connected
to constant +12 volts (together with the yellow one).
BT module and USB connector will be disabled when the device is turned off.
Version
Viewing the current software version.
Beep - button sound
Enable/disable sound when pressing buttons.
AUX IN
Enable/disable AUX source.
SWC
Programming standard steering wheel buttons.
Detailed programming procedure on page 18.
To Next Page
Loading...
