18
Most device settings are available in the AurA Audio mobile application
for Android or iOS.
1. Install the "AurA Audio" application from Google Play or App Store.
2. Connect your smartphone to the receiver via Bluetooth.
3. Launch the "AurA Audio" application to control the receiver.
Steering wheel button setup (Direct SWC)
This function can only be implemented in cars that have resistive control buttons;
the common wire of the buttons is connected to the vehicle ground.
For correct operation of the steering wheel buttons, you must first connect the
wires of the standard control panel to the ISO connector (section A).
APPLICATION
AURA AUDIO
Bluetooth music (A2DP)
The VENOM-D41DSP receiver supports Bluetooth audio transmission protocol.
After successfully pairing your mobile device with the receiver, you will be able to
play music from your phone on the car audio system.
To switch tracks, press the buttons (7) or (5) .
To stop playback, press the button (15) .
You can connect an external source to the 3.5mm jack on the front of the receiver
using an AurA AUX cable (sold separately).
AUX
Press and hold for 10 seconds. button (19) RST to reset the device to factory
settings.
Reset settings
Software update
We are pleased to offer the option to update the firmware to bring you the best
performance and the latest features for your device.
Please check the availability of the new software version on the website
www.aurael.ru
Phone app
To Next Page
Loading...
