13
Color select
Setting the RGB color.
All zone - color selection for all 3 zones at the same time.
Zone 1, Zone 2, Zone 3 - choice of color for each of the 3 zones.
Dimmer
Backlight dimming settings, on/off, or select two dimming levels.
Spectrum
Frequency spectrum display on / off.
Display
Tuner
Local seek
Local search on / off.
Stereo set
Stereo mode on / off.
Regional
Selecting a broadcasting region (Europe, USA, Asia, Russia).
You can save 6 independent settings (presets) and quickly switch between them.
IMPORTANT! Settings are retained when battery power is removed.
1. Adjust the EQ, delay and crossover parameters.
2. To save the current settings to memory cell “1”,
quickly press the “1” button 3 times.
3. Change EQ, delay and crossover settings.
4. To save the current settings to memory cell “1”,
quickly press button “2” 3 times.
5. Press the “1” button 2 times quickly to recall the settings stored
in “Preset 1” from memory.
6. Press the “2” button 2 times quickly to recall the settings saved in “Preset 2”.
DSP Presets
To Next Page
Loading...
