17
Phone pairing
1. Turn on Bluetooth on your mobile device.
2. Find “INDIGO-879DSP” in the list of available BT devices and connect to it.
PIN code for authorization: 1234 .
WARNING! No need to pair with the BLE channel!
This may cause the device to become unstable!
3. If the connection is successful, the “BT” indicator on the receiver’s display
will stop blinking and light up constantly.
4. The audio signal from the mobile device (music and calls) will be
transmitted to the car speakers.
BLUETOOTH
Switching folders and tracks
Press the button (13) or (12) to switch to the previous or next source folder.
Press and hold the (13) or (12) button to move 10 tracks backward or forward.
USB
Outgoing call
Dial the subscriber's number on your phone.
The call will be made on speakerphone.
Incoming call
When an incoming call comes in, the caller's number will be displayed on the
receiver's screen. Press the button (18) to receive a hands-free call.
Ending call
To reject an incoming call or end a conversation, press and hold the button (18) .
Switching between phone and speakerphone
During a call, press the button (18) to transfer audio from the speakerphone to
your phone or from your phone to the speakerphone.
Call to the last dialed number
Press and hold the button (18) on the receiver to call the last number in your
phone's outgoing call list.Press the button (18) on the receiver to activate the
Siri function.
Volume control
Rotate the volume knob during a call to adjust the volume level.
Press the (10) MUTE button to mute the sound.
To Next Page
Loading...
