7
Location can significantly affect the controller operation. Controller
located in a place with no air circulation or exposed to direct sunlight
may not work correctly. Install the controller on the internal wall of
the building (partition wall), in a place with air circulation. Avoid
installing it in the vicinity of heat generating devices (TV set, heater,
fridge) or in places exposed to direct sunlight. Installing the
controller near a door may also cause problems as the controller will
be exposed to vibrations.
Selecting a correct location
for the AURATON 3003 temperature controller
6
3. Temporary temperature reduction time
This symbols shows how long the temporary temperature
reduction mode will be on.
4. Temperature unit ( )
Shows that the temperature is displayed in degrees Celsius.
5. Indicator that the temporary temperature reduction
is programmed ( )
Indicates that the user has programmed the temporary
temperature reduction mode. It appears when the mode is not
currently on, but the function of temporary temperature
reduction is active (more information in the “Setting the
temporary temperature reduction mode” section).
6. Controller on indicator ( )
Indicates the device status. It appears when the controlled
equipment is turned on.
7. Indicator of temporary temperature reduction mode ( )
Appears when the temporary temperature reduction program is
running.
To Next Page
Loading...
