A flashing symbol of the day of the
week appears in the upper left corner.
Turn the knob to the left or right to set
the day and confirm the selection using
the ( button.
IMPORTANT:
If no button is pressed for 60 seconds in the initial edit mode, 12:00 o’clock and
Monday, as the day of the week, will be set automatically.
IMPORTANT:
When programming any other functions, not pressing any button for 10 seconds is
equivalent to using the ( button.
Setting the clock and day of the week
To set the clock:
1. Press the m button. The hour
segment on the display will start
flashing.
To Next Page
Loading...
