Offset change
Offset allows you to calibrate temperature indications with a tolerance of ± 3°C.
AURATON Libra may for example show that the temperature in the room is 23°C, while
a regular room thermometer next to it may show 24°C. Changing the offset by +1
degree, will make AURATON Libra show the same temperature as the room
thermometer.
The offset change mode is signaled by a flashing OFFS. By turning the knob to the left
or right, you can set the desired value in the range from -3.0 to 3.0 (preset – 0.0).
Confirm your choice by pressing the ( button. AURATON Libra will return to the
normal operating mode.
IMPORTANT:
If no button is pressed for 10 seconds while changing the configuration
settings, AURATON Libra will return to the normal operating mode.
IMPORTANT:
Pressing any function button for the first time always turns on the backlight,
and then the function of a specific button.
Clock calibration
To Next Page
Loading...
