2. Temperature – AURATON Libra displays the temperature of the room in which it is
installed in normal operation mode.
3. Temperature unit – tells you that the temperature is displayed in Celsius degrees
(°C).
4. Clock
Time is displayed in a 24-hour system.
5. Timeline
Program progress indicator. The timeline is divided into 24 segments, each of which
corresponds to one hour. It shows how a given program is implemented. (see
chapter “Timeline”)
6. Day mode indicator (S)
Indicates that AURATON Libra is operating in the day mode. (see chapter
“Temperature programming”)
7. Night mode indicator (T)
Indicates that AURATON Libra is operating in the night mode. (see chapter
“Temperature programming”)
8. Anti-freezing mode indicator (U)
Indicates that AURATON Libra is operating in the anti-freezing mode. (see chapter
“Anti-freeze mode”)
9. Manual control indicator (V)
Appears when no program is used. (see chapter “Manual control mode”)
10. AURATON Libra activation indicator (Y)
Segment giving information about the operating status of AURATON Libra. Visible
when the regulator is turned on.
Weekly, wired thermostat
Description of the AURATON Libra
Turning AURATON Libra on for the first time
Introduction to programming
Programming
Manual control
Anti-freezing temperature
Resetting AURATON Libra
Master reset of AURATON Libra
Configuration settings
PWM operating mode
Additional remarks
The AURATON Libra connection schematics
Cleaning and maintenance
Technical specifications
Disposing of the devices
Download
To Next Page
Loading...
