11. Program number
Indicates the number of the currently running program. (see chapters “Factory
programs” and “Weekly programming”)
12. Dead batteries (X)
The indicator is visible when the minimum permissible battery voltage level is
exceeded. The batteries need to be replaced as soon as possible.
IMPORTANT:
In order to maintain any programmed parameters, the battery replacement
operation should not exceed 30 seconds.
Choosing the right location for AURATON Libra
Weekly, wired thermostat
Description of the AURATON Libra
Turning AURATON Libra on for the first time
Introduction to programming
Programming
Manual control
Anti-freezing temperature
Resetting AURATON Libra
Master reset of AURATON Libra
Configuration settings
PWM operating mode
Additional remarks
The AURATON Libra connection schematics
Cleaning and maintenance
Technical specifications
Disposing of the devices
Download
To Next Page
Loading...
