The correct operation of AURATON Libra is largely influenced by its location. Using the
device in a place with no air circulation or a place with direct sunlight may result in
incorrect temperature control. AURATON Libra should be installed on the internal wall
of a building (a partition wall), in an environment with free air circulation. You should
avoid proximity to heat-emitting devices (TV, heaters, refrigerators) or locations
exposed to direct sunlight. The vicinity of doors and exposing AURATON Libra to
possible vibrations may also cause problems with proper operation of the device.
Weekly, wired thermostat
Description of the AURATON Libra
Turning AURATON Libra on for the first time
Introduction to programming
Programming
Manual control
Anti-freezing temperature
Resetting AURATON Libra
Master reset of AURATON Libra
Configuration settings
PWM operating mode
Additional remarks
The AURATON Libra connection schematics
Cleaning and maintenance
Technical specifications
Disposing of the devices
Download
To Next Page
Loading...
