Connecting cables to AURATON Libra
To connect the wires, remove the casing as shown below:
The terminals are located on the back of AURATON Libra, under the plastic casing.
Weekly, wired thermostat
Description of the AURATON Libra
Turning AURATON Libra on for the first time
Introduction to programming
Programming
Manual control
Anti-freezing temperature
Resetting AURATON Libra
Master reset of AURATON Libra
Configuration settings
PWM operating mode
Additional remarks
The AURATON Libra connection schematics
Cleaning and maintenance
Technical specifications
Disposing of the devices
Download
To Next Page
Loading...
