14 US-EN
In the event of a battery leak, immedi-
ately remove the battery from the product
to prevent damage.
Only use the same type of batteries . Do
not mix used and new batteries.
Remove the batteries if the product will
not be used for extended periods.
Risk of product damage
Only use the specified battery type!
Insert batteries according to polarity
marks (+) and (-) on the battery and the
product.
Clean the contacts on the battery and in
the battery compartment before inserting!
Immediately remove drained batteries
from the product.
SAVE THESE
INSTRUCTIONS
Before initial use
First activate the batteries inside the
outdoor sensor, then inside the tem-
perature station.
Note: Before initial use, remove the protec-
tive film from the device display.
To Next Page
Loading...
