- 12 -
If no button is pressed within 30 seconds, the radio-controlled weather
station will automatically return to the normal time display.
Light
Press the SNOOZE/LIGHT-button 4 to briefly activate the backlight.
12/24-hour time format
Press the SET-button 32 1 x long and 2 x short in normal time display
mode. The 12- or 24-hour time format will blink and can be set by
pressing the up-button 25 or the down-button 26. In 12 hour
time format the display will show the AM-Symbol 22 before noon and
the PM symbol 22 after noon. Press the SET button 32 repeatedly to
return to normal time display mode.
Alarm
The radio-controlled weather station has an alarm feature.
The pre-set alarm time is 06:00 o’clock. To activate or
deactivate the alarm time, press the ALM-button 31 on the back side of
the radio-controlled weather station. The display will switch to the
alarm time display and show the words ALARM OFF and ALARM ON
to indicate whether the alarm feature is on or off. Press the up-button
25 to activate the alarm. Press the down-button 26 to deactivate the
alarm. If the alarm feature is activated, the bell symbol 7 will appear
on the display. If the alarm feature is deactivated, the bell symbol 7 will
disappear from the display.
To change the alarm time, first press the ALM-button 31 briefly. Then
press and hold the ALM-button 31 for 3 seconds until setting mode is
activated. The hours will blink on the display and can be set by
pressing the up-button 25 or the down-button 26. Confirm your
setting by pressing the ALM-button 31. Set the minutes in the same
way. After setting the minutes, the display will automatically return to
the normal time display.
Snooze (SNOOZE)
Press the SNOOZE/LIGHT-button 4 when the alarm sounds to briefly
deactivate the alarm. The bell symbol 7 and the Z
Z
symbol 3 will blink
on the display. After 5 minutes, the alarm will sound again. Press any
button except the SNOOZE/LIGHT-button 4 to turn the alarm off. The
alarm will remain activated for the following day.
Temperature unit
Press the down-button 26 in normal time display mode to select the
temperature unit Celsius (°C) or Fahrenheit (°F).