Auriol z29592 - Starting the weather station up; Regulating the default settings for language, time, date, time zone

12 GB/IE

Starting the weather station up
Note: When setting it up, if you do not press any button
within 60 seconds, the weather station will automatically
return to the output mode.
 During the set-up procedures, press and keep the
RESET
1
or ST. / STP. buttons
4
pressed down. This
will accelerate the set-up.

Regulating the default settings
for language, time, date, time zone
 Press the MODE button
2
as often as necessary until
the date display
9
(day of the week mode) appears
in the display
5
.
 Hold the MODE button
2
down for two seconds to
get to the set-up mode.
 Press the RESET button
1
or ST. / STP. Button
4
to select
the language you wish to have for the date display
9
.
 Press the MODE button
2
to set the time zone.
 Using the RESET button
1
or the ST. / STP. button
4
to choose between the following time zones: