Auriol z29592 - Switching off the automatic display;activating the sleep function

16 GB/IE
 Press the MODE button
2
as often as necessary until
the date display
9
(day of the week mode) appears
in the display
5
.
 Hold the MODE button
2
down for two seconds to
get to the set-up mode.
 Press the MODE button
2
as often as necessary until
you get to set-up procedure for switching the touch
beep function on / off (BEEP).
 Press the RESET button
1
or the ST. / STP. button
4
to
switch the touch tone on or off.
 Press the ALTI / BARO button
3
to leave the set-up mode.

Switching off the automatic display /
activating the sleep function
If the sleep function is on, the display
5
will switch itself off
if no button has been pressed for 48 hours.
 Press the MODE button
2
as often as necessary until
the date display
9
(day of the week mode) appears
in the display
5
.
 Hold the MODE button
2
down for two seconds to
get to the set-up mode.
 Press the MODE-button
2
as often as necessary until you
get to the set-up to switch the sleep function on / off (SLEEP).