Auriol z29592 - Measuring the difference in height

26 GB/IE
 Press the RESET
1
or ST. / STP.
4
button to set the
value you wish to have.
 If you enter incorrect information, press the MODE
button
2
and enter a new value.
 Press the ALTI / BARO button
3
to stop the adjustments.

Measuring the difference in height
The weather station measures the lowest and highest point
(e.g. on long walks).
 Press the ALTI / BARO button
3
until TRK appears in
the display
5
.
 Hold the RESET button
1
down until the altimeter
display indicates 0.
 Press the ST. / STP. button
4
at the start of your long
walk. The TRK in the display will flash.
 Press the ST. / STP. button
4
again when you get to
the end of your long walk.
 Press the RESET button
1
. The minimum and maximum
values of the height measurement will appear in the
display
5
.