Auriol z29592 - Timing;storing and retrieving lap times

19 GB/IE
Before using it for the first time, the stopwatch will read 0.
 Press the MODE button
2
as often as necessary until
CHR appears in the display
5
.
 Press the ST. / STP. button
4
to start the stopwatch.
Press the button again to stop the stopwatch.
 The display
5
will indicate the time between start
and stop.
 If you press the ST. / STP. button
4
again, the time will
continue to run again.
 Press the RESET button
1
for 2 seconds to reset the
stopwatch display to 0 again.
Note: With time measurements longer than one hour,
the hours, minutes and seconds are indicated in the time
display.

Timing / storing and
retrieving lap times
Timing and storing lap times
You can time and store up to 10 lap times.
 Press the MODE button
2
as often as necessary until
CHR appears in the display
5
.
 Press the ST. / STP. button
4
to start the stopwatch.