Aurora AR100W - Care and Maintenance; Cleaning Instructions; Filter Replacement Procedure

10 ENGLISH
OPERATION
CARE AND MAINTENANCE
Sleep mode button:TaptheicontoturnSleepModeon/off.SleepModeoperates
quietlywiththelowestfanspeed.
Timer button: Tapthetimericontoselectthetimeroption.
Display lock button: Tapandholdfor3secondstolockorunlockthedisplay.
Filter Change Indicator/ Button: Tapandholdfor3secondstoresetthestatusafter
thefilterisreplaced.
Display Light Off Button: Taptheicontoturnthedisplayoff.Tapanybuttonexcept
thepowericontoturnthedisplaybackon.
Cleaning:
•ALWAYSUNPLUGTHEAIRPURIFIERBEFORECLEANING!
•Onlycleantheairpurifierbywipingtheunitwithadrysoftclothortowel.
•Donotcleanorimmersetheairpurifierinwater.Havingtheunitwetmayresultindam
ageormalfunctiontotheelectricalcomponents.Iftheairpurifierhappenstogetwet,
besuretocompletelydrytheunitimmediatelywithaclothortowel.
•Neveruseanythingflammableorvolatilefluidssuchaspaintthinner,benzene,or
scouringpowdertocleantheairpurifier.Thismayresultinseriousinjuryordamageto
theproduct.
•Donotwashandreusethefilter.
Filter Replacement: Only use the Aurora Brand Ture HEPA replacement filters.
The Filter Change Indicator will light up as a reminder to check or change the fil-
ter. The replacement period may vary depending on the hours of use and air quality.
Under normal usage, most filter needs to be replaced within 5~6 months.
Replacement Steps:
1.Unplugthemachinefromthewallsocket.(FIGURE1)
2.Fliptheairpurifierupsidedown.Turnthebottomcovercounterclockwisetoopenand
CONTINUED NEXT PAGE
2h
4h
6h 8h