C300H / C300HI / C300H x4 / C300HI x4
C350H / C350HI / C350H x4 / C350HI x4
106
Drain the water from the fuel filter (fig. 1)
In models C300H x4 / C300HI x4 / C350H / C350HI / C350H x4 / C350HI x4
The fuel used may contain water which is deposited on the lower part of the filter element.
To protect the fuel injection system it is essential to drain the water from the filter element
regularly as shown in the MAINTENANCE CHART.
- Unscrew the drainage cap (a) located on the lower part of the filter element.
- Wait until all the water in the filter has drained off.
- Tighten the drainage cap (a).
ATTENTION
Take care to correctly tighten the drainage cap. If it is loose, unwanted air may
enter the injection system and cause the engine to operate incorrectly.
Dispose of remains of fuel in authorized centres.
Periodic
Maintenance
Operations
(fig. 1)
a
To Next Page
Loading...
