AUSA C300H - Page 117

C300H / C300HI / C300H x4 / C300HI x4
C350H / C350HI / C350H x4 / C350HI x4
115
 Lubrication
Rear axle
C300H-HI / C350H-HI
1 nipple on the central articulation of the axle (fig. 1).
2 nipples, one on each wheel pivot (fig. 2).
2 nipples, one on hydraulic cylinder pin (fig. 3)
C300H-HI x4 / C350H-HI x4
1 nipples on the central articulation of the axle (fig. 4).
4 nipples, two on each wheel reduction joint (fig. 5).
Rear Axle cardan shafts
C300H-HI x4 / C350H-HI x4
2 nipples, one on each cross (fig. 6).
1 nipple on the grooving (fig. 6).
(fig. 1)(fig. 2) (fig. 5)(fig. 6)
(fig. 4) (fig. 3)
Periodic
Maintenance
Operations