EN-3
5. Pairing with Bluetooth Devices
5-1 Pairing the headphones with a computer
Before pairing the headphone with your computer, please
make sure your computer or laptop has the built-in Wireless
feature. If not, you must purchase a Wireless dongle,
preferably version 2.1 or above.
1.Make sure the headphone is off.
2.Turn on wireless capability on the computer.
3.The “Search new device” screen will be displayed.
4.Do not place both devices more than 3 ft/1 m away from
each other.
5.Press and hold the power button on the headphone until it
powers on but don't let go just yet. Continue holding down on
the power button until you see the LED indicator flashes blue
and red alternately, which means your headphone is in
"pairing mode" waiting to be paired with your device. You will
hear a prompt.
Note1: It is strongly recommended fully charging for the
first use. Playtime varies according to volume level and
audio content .
5V/1A USB charging adapter
active computer USB port
To Next Page
