EN-4
6.Active Noise Canceling
AUSDOM ANC10 contains a noise cancelling circuit, Noise
mainly in an airplane, buses or trains is effectively reduced.
1).The noise cancelling effect may not be pronounced in a
very quiet environment, or some noise may be heard.
2).The noise cancelling effect may vary depending on how
you wear the headphones.
6.As soon as the computer system detects the new device,
please select “AUSDOM ANC10" to pair. Once successfully
paired, the LED turns to solid blue. You will hear a prompt.
5-2 Pairing the headphone with a phone
1.Make sure the headphone is off.
2.Do not place both devices more than 3 ft/1 m away from
each other.
3.Press and hold the power button on the headphone until it
powers on but don't let go just yet. Continue holding
down on the power button until you see the LED indicator
flashes blue and red alternately, which means your
headphone is in "pairing mode"waiting to be paired with
your device. You will hear a prompt.
4.Turn on wireless capability on your phone and search for
new devices.
5.Select the “AUSDOM ANC10” to pair. Once successfully
paired, the LED turns to solid blue. You will hear a prompt.
5-3 Connecting to paired devices
AUSDOM ANC10 will pair with the last paired device
automatically when turning on. Because of different
systems, some computers or laptops may need to be
manually paired every time.
To Next Page
Loading...
Need help?
General
