ausdom ANC10 User Manual

EN-7
Note:
-There will be an alert tone when the volume reaches the
maximum level.
9. Control Instructions
Function Operation
Play media Press the power button
End a call Press the power button
Power on
When the headphone is off, press and hold the power
button for 3 seconds, and you will see the blue light
flash and hear “power on”.
Answer a call
Press the power button to answer the call.
Power off
When the headphone is on, press and hold the power
button for 3 seconds, and you will hear “power off”.
When the headphone is on, press and hold the power button
3 seconds, and the LED flashes red and sounds a prompt..
Pause/restart
media playback
Press the power button
Increase
volume
Press the Volume Up V+ button
Decrease
volume
Press the Volume Down V- button
Skip to next
track
Press and hold the V+ button for 1-2s
Skip to previous
track
Press and hold the V- button for 1-2s
Noise Canceling
On
Press the Noise-Canceling Button to ON, Blue LED
light on.
Noise Canceling
Off
Press the Noise-Canceling Button to OFF, Blue LED
light off
Play music/video Press the power button
End a call To end the call, press the power button.
Answer a call
When a call rings, press the power button
Pause/restart
music/video
Press the power button
Increase
volume
Press the Volume Up V+ button
Increase
volume
Decrease
volume
Press the Volume Down V- button
Skip to next
track
Press and hold the V+ button for 1-2s
Skip to previous
track
Press and hold the V- button for 1-2s
Noise Cancelling
On
Press the ANC button, the green light on.
Noise Cancelling
Offf
Press the ANC button, the green light off.
Pairing
Press and hold the power button for about 5 seconds til
the red and blue light flash alternatively, and you will
hear “paring”.

ausdom ANC10 Specifications

General

Brand	ausdom
Model	ANC10
Category	Wireless Headphones
Language	English