Austa AU Series - Nameplate

2
1.3 Nameplate
Take AU 50K3P for example
1.4 Operating instructions
AU Series inverters are designed and tested strictly in accordance with relevant international safety
standards. But for electrical and electronic equipment, its safety involves its installation, trial run, operation
and maintenance of the whole process. Therefore, improper use or misoperation will also endanger:
 Life and personal safety of the operator or third party.
 Inverter or other property belonging to the operator or third party.
To prevent personal injury or damage to inverters and other devices, observe the following safety precautions
during operation and maintenance. Specific precautions during the operation will be described in the
corresponding chapter.
The above professional and technical personnel can carry out the following work:
 Mount the inverter on the wall
 Connect inverter to PV system.
 Connect other equipment to the PV system.
 Test run of inverter.
WARNING
All installation operations must be performed only by professional technicians.
 Professional and technical personnel must: have been specially trained.
 Read this manual completely and master the operation related safety matters;.
 Be familiar with electrical system safety specifications.