5
The "notes" are additional information in the manual, highlighting and supplementing the
content, too. There may be some tips or tricks you can use to optimize your product a
question or save you time.
You can start the inverter again only after removing any fault that affects the security
performance of the inverter.
If you need any repair service , please contact our equipment supplier or service provider.
.
Contact or improper handling of printed circuit boards or other electrostatic sensitive
components can cause device damage.
Avoid unnecessary contact with the PCB board.
Observe the ESD rules and wear an ESD wrist strap.
Do not change the internal components of the inverter without authorization. The company
will not undertake warranty and joint and several liability for the loss caused thereby.
All safety identifiers, warning labels and nameplates on the inverter.
Must be clearly visible.
Cannot be removed or overwritten.
Note the following.
Grid access criteria.
Description of PV panels.
Other electrical equipment safety instructions
To Next Page
Loading...
