AUSTRALIAN MONITOR AMIS120XL Series - User Manual

AMIS120XL Series Service Manual
Product Description
Set-Up/Test Procedures
Component Lists
Full Schematics
PCB Overlays
Australian Monitor. Private Bag 149 Silverwater NSW 1811. Australia
www.australianmonitor.com.au

AUSTRALIAN MONITOR AMIS120XL Series Specifications

General

Brand	AUSTRALIAN MONITOR
Model	AMIS120XL Series
Category	Amplifier
Language	English

Summary

AMIS120 XL Product Description

Circuit Overview

Details the amplifier's design, features, and power options including circuit description.

Power Amplifier Stage

Describes the push-pull single supply amplifier and its current limiting circuit.

Speaker Output Terminal Strip

Details connections for low impedance and 70/100V speaker loads.

Input;Output Interfaces and Controls

Input;Output Ports Overview

Covers XLR, RCA, Phantom Power, and Line Input details.

Dip Switches and Insert Point

Explains dip switch settings and insert point functionality.

VOX Relay and VCA Control

Details VOX relay output and VCA remote master level control.

Special Features and Muting Systems

Tone Generators

Describes the four built-in tones available from the tone generator.

VOX Muting System

Explains the priority/muting system and its configuration.

Testing and Validation Procedures

Pretesting and Setup Requirements

Details pre-test checks and necessary equipment.

Power Up and AC Checks

Covers power-on sequence, voltage checks, and AC measurements.

Function, Final, and Listening Tests

Outlines sensitivity, tone, and audio performance evaluation.