Need help?Do you have a question about the AUSTRALIAN MONITOR XA1000 and is the answer not in the manual?
General| Power Output | 1000W |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Signal to Noise Ratio | >100dB |
| Connectors (Output) | Binding posts, Speakon |
| Damping Factor | >200 |
| Power Output (Stereo) | 500W RMS per channel @ 4 Ohms |
| Power Output (Bridged) | 1000W RMS @ 8 Ohms |
| THD | <0.05% at 1kHz |
| Input Impedance | 20k Ohms Balanced, 10k Ohms Unbalanced |
| Input Sensitivity | 0.775V |
| Protection | Short circuit, DC voltage, thermal overload, input overload |
| Connectors (Input) | XLR, TRS |
| Dimensions | 483 x 88 x 380mm |
| Total Harmonic Distortion | <0.05% at 1kHz |
| Output Impedance | 4 ohms |
To Next Page