Austro Engine AE50R User Manual

AE50R, AE50RA
AE50RAB
Engine Manual
Doc. No. E1.01.01-E Rev. 6 10-March-2011 Page 5-2
Eccentric Shaft Hardened and ground alloy steel. The complete
rotating assembly is in full dynamic balance to
minimise vibration, achieved by counter weighting
each end of the assembly. Both the main and rotor
bearings are rolling element types.
Flywheel Cast iron fitted with an induction–hardened steel
starter ring gear.
5.2.4 Out–put Drive
Take from the eccentric shaft via a woodruff key.
Rotation Direction The eccentric shaft rotate in a clockwise direction
when viewed from the driving side of the engine.
5.2.5 Net Dry Weight
Approximately 26,8 kg. (59,1 lbs)
5.2.6 Cooling
Approximately 90% of surplus heat is rejected into the
liquid cooling system; the balance is rejected via rotor
cooling air.
Coolant 50 : 50 Distilled Water – Ethylene Glycol mix
Silkolene PRO–COOL (or equivalent)
5.2.7 Fuel Specification
AVGAS 100LL
EUROSUPER, ROZ 95, in accordance with EN228
or equivalents.

Austro Engine AE50R Specifications

General

Brand	Austro Engine
Model	AE50R
Category	Engine
Language	English