Austro Engine AE50R User Manual

AE50R, AE50RA
AE50RAB
Engine Manual
Doc. No. E1.01.01-E Rev. 6 10-March-2011 Page 5-3
5.2.8 Pressure to Carburettor
min 0.276 bar (4 psi)
max 0.414 bar (6 psi)
5.2.9 Lubrication
Lubrication of all bearings and rubbing surfaces is
achieved via two lines from the oil metering unit driven
off the water pump. The flow rate of the metering unit
is calibrated and must not be adjusted. Use only
approved engines oils.
Oil Separator An optional oil separator is recommended. The
separator is to be supplied by the engine installer.
5.2.10 Oil Specification
Silkolene Comp 2 Premix (Not comp 2 Injector)
Castrol XR77 (EMPA specification 417478/01)
Castrol Power 1 Racing 2T (API TC+, JASO FD, ISO EGD)
AeroShell Oil Sport Plus2 (API TC)

Austro Engine AE50R Specifications

General

Brand	Austro Engine
Model	AE50R
Category	Engine
Language	English