Autel AutoLink AL629 User Manual

Email: sales@autel.com
Web: www.autel.com
AutoLink AL629
Getting Started
Connect the OBD II cable’s 16-pin male adapter to the
vehicle’s DLC which is generally located under the vehicle
dash.
The device will be automatically powered up.
1 2
3 4
IMPORTANT: Before operating or maintaining this unit, please read these instructions carefully. Use this unit
correctly and properly. Failure to do so may cause damage and/or personal injury and will void the product
warranty.
Your AutoLink AL629 is now ready to work.
Connect the OBD II cable’s female adapter to the AutoLink
AL629.
Tighten the captive screws.
Scan QR Code to visit our website at www.autel.com.
Create an Autel ID and register the product with device’s
SN and password.
Thank you for purchasing AUTEL tool. Manufactured to a high standard, our tool will, if used according to these
instructions and properly maintained, give you years of trouble-free performance.
Quick Reference Guide

Autel AutoLink AL629 Specifications

General

Connectivity	USB
Weight	1.1 lbs
Operating Temperature	0°C to 60°C (32°F to 140°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Display	TFT color display
Battery	Li-ion battery
External Power	DC 12V
Vehicle Coverage	Supports OBDII vehicles
Languages	English, French, Spanish
Update Method	USB

Summary

Getting Started

Product Registration and Website Visit

Scan QR code to visit autel.com and create an Autel ID to register the product.

Connect Device to Vehicle

Connect AutoLink AL629 to the vehicle's OBD II port using the provided cable and ensure power.

Ready for Use

Confirms the AutoLink AL629 is ready for operation after successful setup.

Software Update and Delete

Connect and Launch PC Suite

Connect device to PC via USB, run Maxi PC Suite, and log in with Autel ID and password.

Install Software Updates

Select desired software updates in the Update window and proceed with installation.

Delete Installed Software

Navigate to the Installed tab to view and select software for deletion.

Data Printing

Print Data via PC Suite

Connect device, run Autel Printer, select data, and use Print, Edit, Copy, or Clear functions.