iv
⚫ Keep the test equipment dry, clean, and free from oil, water, and
grease. Use a mild detergent on a clean cloth to clean the outside
of the equipment as necessary.
⚫ Do not drive the vehicle and operate the test equipment at the same
time. Any distraction may cause an accident.
⚫ Refer to the service manual for the vehicle being serviced and
adhere to all diagnostic procedures and precautions. Failure to do
so may result in personal injury or damage to the test equipment.
⚫ To avoid damaging the test equipment or generating false data,
make sure the vehicle battery is fully charged and the connection
to the vehicle DLC is clean and secure.
⚫ Do not place the test equipment on the distributor of the vehicle.
Strong electro-magnetic interference can damage the equipment.
⚫ Do not place the device in a strong electromagnetic environment
for strong electromagnetic interference may damage the device.
To Next Page
Loading...
