Autel MaxiProgrammer XP400 Pro - 1 Safety Precautions

1
1 Safety Precautions
The MaxiProgrammer XP400 Pro has been specially designed to work
with Autel’s IM tablets to aid automotive technicians to program vehicle
keys.
To avoid personal injury or damage to the vehicles, please read this
manual first and observe the following safety precautions whenever
working on a vehicle.
Make sure:
 The diagnosis or service is performed in a safe environment.
 The vehicle is operated in a well-ventilated work area.
 The vehicle parts and the XP400 Pro components are welded at a
constant temperature.
 When welding vehicle parts with the XP400 Pro components, the
unit is powered off and is grounded.
 The XP400 Pro is dry, clean and free from oil, water, grease and
dust.
 Electrostatic interference is avoided during operation. If a failure
occurs due to electrostatic interference, eliminate the interference
and perform the operation again.